Articles by Other Authors |
Author |
Date |
Partitioning and Layout of a Mixed Signal PCB, PC Design |
Henry Ott |
6/01 |
High End Digital Systems Give a Thumbs Down to Rules of Thumb |
Michael C
Grimes |
6/00 |
Power Distribution System Design Methodology and Capacitor Selection for Modern CMOS Technology, IEEE Press. |
Smith et al |
|
High Speed Digital System Design |
Hall, Hall, McCall, Wiley |
2000 |
High-Speed Design's Ratchet Man |
Goering |
12/98 |
The Ultimate Board, A Study of Laser Vias vs. Build Up |
Smedley et al |
5/98 |
Understanding Surface Finishes |
Prasad |
5/98 |
Electrical Characteristics of HS TLs with Various Diel |
Montgomery |
4/98 |
Take the Mystery out of AC Termination |
Nemek |
9/97 |
Incorporating BGAs into High Volume Operations |
Partridge |
8/97 |
Primer on High Performance Laminates with Cost and Property |
Neusch |
6/97 |
High Performance Connectors - Gnr to Signal Problems |
Modinger et al |
2/97 |
High Performance Connectors - The Weak Link |
Modinger et al |
2/97 |
Permittivity/Dielectric Constant: Do the Math |
Neves |
11/96 |
Controlling Impedance and the TDR |
Neves |
9/96 |
Selecting the Appropriate Test Pattern for Fab Defect |
Rhodes |
9/96 |
Test Your Spread Spectrum Products |
Schwarts |
8/96 |
Table of PCB Tolerances |
Multek |
1/95 |
| Effects
of 20H Rule and Shielding Vias on
Electromagnetic Radiation on Printed
Circuit Boards |
Chen
and Fang |
|
| 90
Degree Corners, the Final Turn |
Brooks |
1/98 |
